User: Guest |  Site Map |  My BSAC Profile
Dr. Tae Joon Seok

Electrical Engineering
Advisor: Prof. Wu
(510) 642-1023

Home Page
Research Interests: Nanophotonics, Plasmonics, and Si photonics
Job Interests: Academic, post-doc

Tae Joon Seok is a postdoctoral researcher in Prof. Ming Wu group at UC Berkeley, EECS. He received his BS degree from Seoul National University, Korea, in 2007 and Ph.D. degree from UC Berkeley in 2012 in Electrical Engineering. His research interest has been in the area of plasmonics, nanophotonics, and Si photonics. He has authored more than ten papers in leading technical journals and conferences. He has received Samsung Scholarship for graduate research and he is an IEEE member.

Optical Antenna for Ultra-High Efficiency Surface-Enhanced Raman Spectroscopy [BPN460]
Optical antennas are widely used in surface-enhanced Ramon spectroscopy (SERS) because of their ability to focus light in sub-diffraction-limited area, resulting in strong field enhancement. The field enhancement depends critically on the gap spacing of optical antennas. Current nanofabrication techniques such as focused ion beam milling and electron beam lithography are limited by poor uniformity and reproducibility as the dimension decreases below 10 nm, making it difficult to fabricate optical antennas with well-defined sub-10 nm gap spacing. In this project, we report on the design and demonstration of new optical antennas with uniform sub-5nm gap spacing. Using deep-UV spacer lithography, the antenna gap is defined by a thin dielectric layer whose thickness is precisely controlled by atomic layer deposition (ALD). We have fabricated arch-dipole antennas with 5-nm gap spacing. Strong SERS signals from trans-1,2-bis (4-pyridyl) ethylene (BPE) molecules have been measured from the antennas, with an enhancement factor exceeding 10^8. The resonance characteristics and the excitation polarization dependence of the SERS signal confirm the observed SERS enhancement is resulted from the antennas. Since the proposed new antennas can be made by deep UV lithography, uniform SERS substrates with sub-5nm gaps can be mass produced in existing Si CMOS foundries.

Current Active Projects:

     Last Updated: Sun 2014-Jan-26 08:22:50

back to BSAC IAB Agenda


  • Copyright Notification: All papers downloaded from this site are © University of California or the publisher, all rights reserved. Contact the BSAC Webmaster for permission related to copyrighted materials.
  • Links on these pages to commercial sites do not represent endorsements by UC or its affiliates.
  • Privacy Policy
  • Contact Us
  User logged in as: Guest
  User Idle since: July 24, 2014, 12:12 pm